Table of Contents
Advertisement
Vanderbilt
1
5
6
7
3
LCD keypad
1
LCD display
The keypad display (2 lines x 16 characters) shows all alert and warning
messages and provides a visual interface for programming the system
(engineer programming only). The display can be adjusted for contrast and
under which conditions the backlight comes on.
2
Alphanumeric
Alphanumeric keypad allow for both text and numeric data entry during
keys
programming. Alphabetic characters are selected by applying the appropriate
number of key presses. To switch between upper and lower case characters,
press the hash (#) key. To enter a numeric digit, hold down the appropriate
key for 2 seconds.
3
Leverage access
The leverage access tabs provide access to the keypad back assembly clips.
tabs
Users can unhinge these clips from the front assembly by inserting a 5mm
screwdriver into the recesses and pushing gently.
4
Back assembly
This screw secures the front and back assemblies on the keypad. This screw
securing screw
must be removed to open the keypad.
5
LED status
The LED status indicators provide information on the current status of the
indicators
system as detailed in the table below.
6
Soft function keys The left and right soft function keys are context sensitive keys to navigate
through menus/programming.
7
Proximity device
If the keypad has been fitted with a proximity device receiver (see page
receiver area
[➙ 343]), users should present the Portable ACE Fob to within 1 cm of this
area to SET/UNSET the system.
8
Multi-functional
The multi-functional navigation key in combination with the keypad display
navigation Key
provides an interface for programming the system.
LED
Status
Installation & Configuration Manual
8
4
Keypad user interface
12
SPCK420/421
2
1
2
3
abc
def
4
5
6
ghi
jkl
mno
7
8
9
pqrs
tuv
wxyz
3
A6V10276959
01.05.2016
91
- Quick Links:
- Setup
Hide quick links:
Advertisement
Table of Contents
