Vanderbilt SPC42 Series Installation & Configuration Manual page 189

Vanderbilt
Right User Profile
Type Default
RF Control Standard
Manager
Access Control
User Rights - Test
Bell Test: Standard
Manager
Walk Test Standard
Manager
WPA Test Standard
Manager
Seismic Test Standard
Manager
User Rights – Service Engineer
Set Users
(Master)
Set User
Profiles
Set Calendars
Set Doors
* Functions not enabled by default for this user but can be selected.
Access Control
1. Enter a Site Code, if required, for all cards assigned to this user profile. Refer
to the appendix section on Card Readers and Formats [➙ 354].
2. Select the Access rights of this user profile for the doors configured on the
system. Options are:
- No access
- No time limit (i.e. 24 hour access)
- Calendar (if configured)
Users
A list of users assigned to this profile is displayed. Click on a user to view or edit
the user's details.
You can create a new user profile based on an existing profile by clicking
Replicate. A new User Profile page is displayed.
Installation & Configuration Manual
Engineer programming via the browser
Description
User can control RF output
User can perform a bell test to test the external bells,
strobe, internal bells and buzzer to ensure their correct
operation.
User can perform a walk test to allow for testing of the
operation of all alarm sensors on a system.
User can test a WPA.
User can test the seismic detector.
User can create and edit other users on the system
with no restriction on user rights.
User can create and edit user profiles on the system.
User can configure calendars.
User can edit doors.
17
Users
189
A6V10276959
01.05.2016