Table of Contents
Advertisement
17.9.5.2.8
17.9.5.2.9
17.9.5.2.10
Vanderbilt
All Okay Time
All Okay Event
RF Output
RF Output Time
Enter the number of seconds that the RF Output will remain on
for.
0 seconds will toggle the output on and off.
The other Miscellaneous options are described in Entry/Exit [➙ 239] for SPC Pro
Fire Exit Route
Fire exit route
Area Triggers
The Triggers section is only displayed if triggers have been defined previously.
(See section on Triggers)
Click on the Edit button to add, edit or delete trigger conditions for the area. The
following page is displayed:
Configure the trigger for the area using the following parameters:
Trigger
Edge
Installation & Configuration Manual
Engineer programming via the browser
Time (in seconds) in which 'All okay' must be confirmed before alarm is
raised. (Range 1 – 999 seconds)
Select the event type to be sent when the 'All okay' timer expires.
Options are Panic (Silent), Panic and Duress.
Select the doors which will open when fire
occurs in this area. This option does not
display in domestic mode.
Select a trigger from the drop down list.
The trigger can activate from either the positive or negative
17
Configuration
245
A6V10276959
01.05.2016
- Quick Links:
- Setup
Hide quick links:
Advertisement
Table of Contents
