Vanderbilt SPC42 Series Installation & Configuration Manual page 284

Engineer programming via the browser
17
Configuring Communications
17.10.2.2.3
284
Vanderbilt
Event Timeout
Edit Installation Details
The installation details are passed to the RCT to help the operator to identify the
panel.
1. Click the Edit Installation Button.
1. Complete the fields in the table below.
2. Click Save.
ATS Installation ID
Company ID
Company Name
ATS Installation Address
GPS Coordinates
ATS Installer Name
Installer Phone Number 1
Installer Phone Number 2
Installation & Configuration Manual
monitoring fails or an event fails to transmit on the
ATP.
The amount of time that the ATP will keep trying
to transmit the event until the event fails on the
ATP and is passed to the next ATP. Default: 2
minutes.
30 seconds

60 seconds

90 seconds

2 minutes

3 minutes

5 minutes

10 minutes

The ID of the ATS Installation (1 - 999999999).
For future use.
Name of the company.
The address of the ATS installation.
The GPS coordinates of the installation.
The name of the installer of the ATS.
The phone number of the installer of the ATS.
The phone number of the installer of the ATS.
A6V10276959
01.05.2016