Vanderbilt SPC42 Series Installation & Configuration Manual page 289

Vanderbilt
3. Click Back to return to the Event Profiles screen.
 The name of each exception displays in the Event Exceptions table at the
bottom of the screen. The table shows the settings for the fields Report
Event, Filter Exception, Event Code (SIA/CID) and Remap Exception for
the event.
1. Click the Edit icon to make changes or the Delete icon to remove an Event
Exception.
2. To apply the event profile to an area, select the area checkbox.
3. Click Save to save the event profile.
4. Click Back to view the profile in the Event Profiles table.
Identification
Name
Event ID
Event Description
Event Filter
Report Event
Filter Exception Enable
if (0 ≤ Zone ID ≤ 9999)
then Report Event/Don't Report Event
Event Format
SIA Event Code
Contact ID Event Code / Qualifier
Remap Exception Enable
Zone ID
if (0 ≤ ≤ 9999)
Installation & Configuration Manual
Engineer programming via the browser
Configuring Communications
Enter the name of the Event Exception.
Event ID of the event on the system. This is
display only.
Description of the event. This is display only.
Check to report the event. This overrides the
reporting value set for the event Filter Group. For
example, if the Filter Group Intruder Alarms is set
to report, you can exclude the BA event or by
disabling this setting.
Check to exclude a range of addresses, for
example Zone IDs, from the Report Event field
setting.
Enter a range of addresses to exclude from the
Report Event setting. For example, if you choose
to report the event type BA, you may choose not
to report Zone ID 1 - 9 for that event.
Alternatively, if you choose not to report the event
type BA, you may choose to report
for that event.
Default SIA event code that is transmitted to
represent the event. This field is display only.
Default Contact ID Event Code / Qualifier
transmitted to represent the event. This field is
display only.
Check to remap the default SIA, CID code /
Qualifier and Event Address to customised
values, for example, to remap
Zone ID 101 - 109
. When enabled, the fields
below display.
Enter the range of addresses to remap for an
event, for example, if you want to remap
17
Zone ID 1- 9
Zone ID 1 - 9
to
Zone ID
289
A6V10276959
01.05.2016