Vanderbilt SPC42 Series Installation & Configuration Manual page 268

Engineer programming via the browser
17
Configuring Communications
268
Vanderbilt
Modem Fault Time
SMS Enable
SMS Server Number
Automated SMS
Automated SMS Number
Test Call Time
GSM Chip Version
GPRS Access Point (APN)
GPRS Access Point
User Name
GPRS Access Point
Password
Click the Test SMS button to send a short text message for the purposes of testing
the system.
Note: The SMS test is provided only for the purpose of ensuring the SMS feature is
operating correctly. A short text message using alphabetic characters (A-Z) should
be used to test this feature.
The SMS test is provided only for the purpose of ensuring the SMS feature is
operating correctly. A short text message using alphabetic characters (A-Z)
should be used to test this feature.
When using the SMS message feature over a PSTN line, it is necessary to
program the phone number of the SMS service provider that services the area in
which the SPC is installed. The SPC system automatically dials this number to
contact the SMS server whenever the SMS feature is activated. Calling line identity
MUST be enabled on the PSTN line for this feature to operate. Each country will
have its own SMS service provider with a unique phone number.
This feature is not released in all countries. Please contact your local supplier for
more information (support of feature, recommended service provider).
Installation & Configuration Manual
as being incorrect before the line is deemed by the SPC to be faulty.
Time delay for a system alert (0 - 9999 seconds). Default 60 seconds.
Tick this checkbox to enable the SMS feature on the system.
Note: The SMS operates using a standard protocol that is used in SMS
telephones. Please note that some PSTN operators do not provide the
service of SMS over PSTN. For SMS to operate over PSTN the
following criteria is required:
Caller ID needs to be enabled on the telephone line.
Direct telephone line – not through PABX or other comms equipment.
Please also note that most Service Providers only allow SMS to a
telephone registered in the same country (this is due to billing issues).
Note: SMS over PSTN is no longer supported. The functionality remains
in the product for backward compatibility.
Only for PSTN. This number automatically displays the default number
for SMS for the country selected. Enter an appropriate phone number of
the SMS service provider that is accessible in your location.
Select the timing for automated SMS messages.
Enter SMS number to receive automated SMS messages.
Displays time of last SMS test call.
Displays the GSM WISMO version number.
If no version number is available, "---" is displayed.
Only for GSM. Access Point Details must be provided by service
provider.
Only for GSM. Access Point Details must be provided by service
provider.
Only for GSM. Access Point Details must be provided by service
provider.
A6V10276959
01.05.2016