Vanderbilt SPC42 Series Installation & Configuration Manual page 192

Engineer programming via the browser
17
Users
192
Vanderbilt
**** XA1.ON (X10)
****.XA1.ON
**** XA1.OFF
****.XA1.OFF
**** LOG
****.LOG
**** ENGA.ON ENGA.ON
(ALLOW ENGINEER)
****.ENGA.ON
**** ENGA.OFF ENGA.OFF
****.ENGA.OFF
**** MANA.ON
****.MANA.ON
**** MANA.OFF
****.MANA.OFF
**** O5.ON
****.O5.ON
****. OUTPUT
**** O5.OFF
****.O5.OFF
****.ASET
(PARTSET A)
****.BSET
PARTSET B)
****.CLR
****. RESTORE
For SMS recognition, mapping gate identification uses the format ONNN, where
O stands for mapping gate, and NNN are the numeric placeholders, of which not
all are necessary.
(Example: O5 for mapping gate 5)
For SMS recognition, X-10 device uses the format: XYNN, where X stands for X-
10; Y stands for the alphabetic identity and NN are the available numeric
placeholders. (Example: XA1)
Installation & Configuration Manual

Where X10 device is Status of "A1"
identified as "A1", it is
triggered on.
Where X10 device is Status of "A1"
identified as "A1", it is
.
triggered off.
Up to 10 recent events Recent events
displayed
Enable Engineer access Allow Engineer
Disable Engineer access Revoke Engineer
Enable Manufacturer Manufacturer status
access
Disable Manufacturer Manufacturer status
access
Where mapping gate is Status of "O5"
identified as "O5", it is
For example:
triggered on.


Status of "O5"
Where mapping gate is
identified as "O5", it is
For example: Output O5 off
triggered off
Allows Partset A of alarm System set.
by SMS
It is also possible to specify
the custom name defined in
the PARTSET rename field
of the Options window. See
Options [➙ 222]
Allows Partset B of alarm System set.
by SMS
It is also possible to specify
the custom name defined in
the PARTSET rename field
of the Options window. See
Options [➙ 222]
For example:
****.ASET NIGHT
Allows clear alerts by SMS
For a multi-area system,
the status of each area is
returned.
Output O5 on.
Output heating on (where
heating is the name of the
output.)
A6V10276959
01.05.2016