Mounting system equipment
6
Mounting a G3 housing
46
Vanderbilt
1 Enclosure
2 Wall
WARNING
If the wall fixing plate is not accurately aligned then the enclosure will not sit
properly on its fixings.
Wiring the Back Tamper Switch to the Control Panel
All control panels have spare inputs configured as tamper inputs that are designed
for wiring the tamper switch and do not require any programming.
This tamper switch will be referred to as 'Aux Tamper 1' by the system.
Installation & Configuration Manual
3 Wall Fixing Plate
4 Tamper Switch
A6V10276959
01.05.2016