Vanderbilt SPC42 Series Installation & Configuration Manual page 208

Engineer programming via the browser
17
Configuration
208
Vanderbilt
Configure the fields described in the tables below.

Description Enter a description for the keyswitch expander.
Key Options
Latch Select if key position should be latched.
Latch timer
Enter duration of latch in seconds (0 - 9999, 0 means latch lasts until key is
turned the other way).
Areas
Location Select the area where the keyswitch is located.
Visual Indications
Indicator/LED There is 1 indicator / LED on the right and 1 indicator / LED on the left side.
Function The function for this indicator / LED.
Function On Select the colour and the state for every indicator if the selected function is ON.
Function Off Select the colour and the state for every indicator if the selected function is OFF.
Change function Press this button to change the function for this indicator. The function can be
enabled or used for a system, area, zone or keyswitch.
Deactivation
Calendar Select if the keyswitch module should be limited by calendar.
Mapping gate Select if the keyswitch module should be limited by a mapping gate.
Output
x
Output Configure and text the outputs for the keyswitch. See Outputs [➙ 198] for more
details
Keyswitch Functions
Installation & Configuration Manual A6V10276959
01.05.2016