Vanderbilt SPC42 Series Installation & Configuration Manual page 296

Engineer programming via the browser
17
Configuring Communications
17.10.3.2.1
17.10.3.2.2
296
Vanderbilt
If an IP connection is required, ensure the Ethernet interface is correctly configured
(see page [➙ 159]) and that internet access is enabled at the router.
Adding an EDP Receiver
1. Select Communications > Reporting > EDP.
 The following window will be displayed:
Max. 8 receivers can be added to the SPC system.
2. Click on the Add button.
 The following window will be displayed.
3. See table below for further information.
Description Enter a text description of the receiver.
Receiver ID Enter a unique number which will be used by the EDP to identify the receiver.
See also
 Editing EDP Receiver Settings [➙ 296]
Editing EDP Receiver Settings
1. Select Communications > Reporting > EDP > Edit.
 The following window will be displayed.
2. Configure the fields as described in the table below.
Installation & Configuration Manual A6V10276959
01.05.2016