10
ROUTe Subsystem
ROUTe:SCAN
Syntax
ROUTe:SCAN (@<ch_list>)
This command is used to set the acquisition sequence which is specified
in the channel list (<ch_list>). This acquisition sequence is also known
as a scan list.
ROUTe:SCAN?
The query command returns an integer value that indicates the specified
input channel. Multiple responses are separated by commas.
Supported Model
U2351A, U2352A, U2353A, U2354A, U2355A, U2356A, U2331A
Parameters
Item
<ch_list>
86
Type
Range of Values
Numeric
Single-ended mode:
U2351A/U2352A/U2353A/U2354A: 101-116
U2355A/U2356A/U2331A: 101-164
Differential mode:
U2351A/U2352A/U2353A/U2354A: 101-108
U2355A/U2356A/U2331A: 101-132
U2300A Series USB DAQ Programming Guide
Default Value
N/A