Output:trigger:dcount - Agilent Technologies U2300A Series Programming Manual

8 OUTPut Subsystem

OUTPut:TRIGger:DCouNT

Syntax
OUTPut:TRIGger:DCouNT <value>
This command is used to set the delay counter value, which is the
duration of output after trigger signal is received.

OUTPut:TRIGger:DCouNT?

The query command returns an integer value representing the delay time
or count.
Supported Model
U2351A, U2353A, U2355A, U2356A, U2331A
Parameters
Remarks
0 ≤ <value> ≤ 0x7fffffff (for counter).
Query Returned Format
<value> [second]
70
Name Type
<value> Integer
Range of Values
0 to 2147483647 (31 bits)
U2300A Series USB DAQ Programming Guide
Default Value
0