TRIGger:ATRiGger:HTHReshold
Syntax
TRIGger:ATRiGger:HTHReshold <value>
This command is used to set the high threshold for analog trigger control.
TRIGger:ATRiGger:HTHReshold?
The query command returns a float value that represents the high
threshold in volts for analog trigger cLTHResholdontrol.
Supported Model
U2351A, U2352A, U2353A, U2354A, U2355A, U2356A, U2331A
Parameters
Remarks
If SONE mode is selected by
threshold will be limited by the RANGE configuration of the first channel
in the scan list.
Query Returned Format
<value> [V]
See Also
TRIGger:ATRiGger:LTHReshold
U2300A Series USB DAQ Programming Guide
Item
Type
<value>
Float
Range of Values
–10 V to +10 V
TRIGger:ATRiGger:SOURce
TRIGger Subsystem
Default Value
0
command, the
14
143