Output:trigger:atrigger:condition - Agilent Technologies U2300A Series Programming Manual

8 OUTPut Subsystem

OUTPut:TRIGger:ATRiGger:CONDition

Syntax
OUTPut:TRIGger:ATRiGger:CONDition <mode>
This command sets the trigger condition for the analog trigger control of
the analog output.

OUTPut:TRIGger:ATRiGger:CONDition?

The query command returns a string value representing the trigger
condition for the analog trigger control for the analog output.
Supported Model
U2351A, U2353A, U2355A, U2356A, U2331A
Parameters
Query Returned Format
<mode> ::= {AHIG|BLOW|WIND}
74
Name Type
<mode> String
Range of Values
AHIG: Above-High-Level triggering
BLOW: Below-Low-Level triggering
WIND: Inside Region triggering
U2300A Series USB DAQ Programming Guide
Default Value
BLOW