Trigger:atrigger:condition - Agilent Technologies U2300A Series Programming Manual

TRIGger:ATRiGger:CONDition

Syntax
TRIGger:ATRiGger:CONDition <mode>
This command is used to set the trigger condition of analog trigger
control.

TRIGger:ATRiGger:CONDition?

The query command returns a string value representing the trigger
condition of analog trigger control.
Supported Model
U2351A, U2352A, U2353A, U2354A, U2355A, U2356A, U2331A
Parameters
Remarks
The value of HTHReshold must larger than value of LTHReshold.
Query Returned Format
<mode> ::= {AHIG|BLOW|WIND}
See Also
TRIGger:ATRiGger:SOURce
TRIGger:ATRiGger:HTHReshold
TRIGger:ATRiGger:LTHReshold
U2300A Series USB DAQ Programming Guide
Item Type
<mode> String
Range of Values
AHIG: Above-High-Level Triggering
BLOW: Below-Low-Level Triggering
WIND: Inside Region Triggering
TRIGger Subsystem
Default Value
BLOW
145
14