Agilent Technologies U2300A Series Programming Manual page 164

16 Error Messages
Remarks
• Errors are retrieved in first- in- first- out (FIFO) order.
• Errors are cleared as you read them.
• If to many errors occur, the last error stored in the queue (the most
• SYSTem:ERRor? will read and clear one error from the queue.
• Below are the SCPI error messages:
156
recent error) is replaced with –350, "Error queue overflow". No
additional errors are stored until you remove errors from the queue. If
no errors have occurred when you read the error queue, the instrument
responds with +0, "No error".
• 0000, "No error",
• –100, "Command error",
-101, "Invalid character",
•
-102, "Syntax error",
•
-103, "Invalid separator",
•
-104, "Data type error",
•
-108, "Parameter not allowed",
•
-109, "Missing parameter",
•
-110, "Command header error",
•
-111, "Header separator error",
•
-112, "Program mnemonic too long",
•
-113, "Undefined header",
•
-114, "Header suffix out of range",
•
-120, "Numeric data error",
•
-121, "Invalid character in number",
•
-123, "Exponent too large",
•
-124, "Too many digits",
•
-128, "Numeric data not allowed",
•
-130, "Suffix error",
•
-131, "Invalid suffix",
•
-134, "Suffix too long",
•
-138, "Suffix not allowed",
•
U2300A Series USB DAQ Programming Guide