Ese - Agilent Technologies U2300A Series Programming Manual

*ESE

Syntax
*ESE <enable_value>
This command enables bits in the enable register for the Standard Event
Register group. The selected bits are then reported to bit 5 of the Status
Byte Register.
Supported Model
U2351A, U2352A, U2353A, U2354A, U2355A, U2356A, U2331A
Parameters
Item
<enable_value>
Returned Format
The query command reads the enable register and returns a decimal value
which corresponds to the binary- weighted sum of all bits set in the
register. For example, if bit 3 (decimal value = 8) and bit 7 (decimal value
= 128) are enabled, the query command will return "+136".
U2300A Series USB DAQ Programming Guide
Type Range of Values
Numeric A decimal value which corresponds to the
binary-weighted sum of the bits in the
register. Refer to table below.
IEEE-488 Common Command
Default Value
This is a required
parameter.
6
35