3
APPLy Subsystem
APPLy:USER
Syntax
APPLy:USER (@<ch_list>)
This command is used to configure a user waveform pattern onto the
FIFO buffer. It outputs a user defined wave. The waveform is generated as
soon as the command is executed. The waveform is generated after
executing the OUTPut ON command.
Supported Model
U2351A, U2353A, U2355A, U2356A, U2331A
Parameters
Remarks
• The
See Also
DATA[:USER]
22
Name
Type
<ch_list>
Numeric
OUTPut
command will return error if channel 201 and 202 is
configured to user defined and pre- defined waveform patterns at the
same time.
Range of Values
201 through 202
U2300A Series USB DAQ Programming Guide
Default Value
N/A