Agilent Technologies U2300A Series Programming Manual page 166

16 Error Messages
158
-311, "Memory error",
•
-313, "Calibration memory lost",
•
-314, "Save/recall memory lost",
•
-315, "Configuration memory lost",
•
-321, "Out of memory",
•
-330, "Self- test failed",
•
-350, "Queue overflow",
•
-400, "Query error",
•
-410, "Query INTERRUPTED",
•
-420, "Query UNTERMINATED",
•
-430, "Query DEADLOCKED",
•
-440, "Query UNTERMINATED after indefinite response",
•
• 112, "Channel list: channel number out of range.",
• 113, "Channel list: empty scan list",
• 222, "Settings conflict: module type does not match state",
• 223, "Settings conflict: trig source changed to IMM",
• 261, "Not able to execute while scan initiated",
• 262, "Not able to abort scan",
• 263, "Not able to execute while instrument is measuring",
• 264, "Not a scannable channel",
• 281, "Not able to perform on more than one channel",
• 301, "Module currently committed to scan",
• 303, "Module is not able to perform requested operation",
• 304, "Does not exist",
• 305, "Not able to perform requested operation",
• 305, "Not able to perform requested operation; cannot generate
user- defined and pre- defined waveforms at once",
• 305, "Not able to perform requested operation; output is running",
• 305, "Not able to perform requested operation; output has stopped",
• 305, "Not able to perform requested operation; function must be
enabled first",
U2300A Series USB DAQ Programming Guide