[Sense:]Counter:gate:source - Agilent Technologies U2300A Series Programming Manual

[SENSe:]COUNter:GATE:SOURce

Syntax
[SENSe:]COUNter:GATE:SOURce <mode>, (@<ch_list>)
This command selects the gate source for counter measurements. You can
select either the internal (default) source or an external gate signal. You
are recommended not to change the gate source when the data acquisition
is in progress.
[SENSe:]COUNter:GATE:SOURce? (@<ch_list>)
The query command returns a string value representing the gate source
setting for general purpose digital counter on each specified counter
channel. Multiple responses are separated by comma.
Supported Model
U2351A, U2352A, U2353A, U2354A, U2355A, U2356A, U2331A
Parameters
Query Returned Format
<mode> ::= {INTernal|EXTernal}
U2300A Series USB DAQ
Item Type
<mode> String
<ch_list> Numeric
Range of Values
INTernal: Gate is controlled by software
EXTernal: Gate is controlled by
COUNT301_GATE/ COUNT302_GATE pins
301 through 302
SENSe Subsystem 11
Default Value
INTernal
N/A
111