Trigger:atrigger:lthreshold - Agilent Technologies U2300A Series Programming Manual

14 TRIGger Subsystem

TRIGger:ATRiGger:LTHReshold

Syntax
TRIGger:ATRiGger:LTHReshold <value>
This command is used to set the low threshold voltage for analog trigger
control.

TRIGger:ATRiGger:LTHReshold?

The query command returns a float value representing the low threshold
voltage for analog trigger control.
Supported Model
U2351A, U2352A, U2353A, U2354A, U2355A, U2356A, U2331A
Parameters
Remarks
• Only post and delay trigger modes can be used if the trigger source is
• If SONE mode is selected by command TRIGger:ATRiGger:SOURce, the
Query Returned Format
<value> [V]
See Also
TRIGger:ATRiGger:LTHReshold
144
Item Type
<value> Float
SONE.
threshold voltage will be limited by the range configuration of the first
channel of the scan list.
Range of Values
–10 V to +10 V
U2300A Series USB DAQ Programming Guide
Default Value
0