12
SOURce Subsystem
SOURce:VOLTage[:LEVel]
Syntax
SOURce:VOLTage[:LEVel] <value>, (@<ch_list>)
This command receives a voltage value, scales it to the proper binary
value and writes a binary value to the designated analog output channel.
This command sets the output voltage level for the specified DAC
channels. After setting the desired level, the command closes the
corresponding output relay and enable outputs from the specified
channels.
SOURce:VOLTage[:LEVel]? (@<ch_list>)
The query command returns a numeric value representing the output
voltage level in volts for the specified DAC channels on each analog
channel specified. Multiple responses are separated by commas.
Supported Model
U2351A, U2353A, U2355A, U2356A, U2331A
Parameters
Remarks
• This command is not allowed when "OUTPut ON" is set.
• Not supported for U2352A and U2354A.
Query Returned Format
<value> [V]
124
Item
Type
<value>
Numeric
<ch_list>
Numeric
Range of Values
–10 V ~ +10 V (12 bits resolution)
201 through 202
U2300A Series USB DAQ Programming Guide
Default Value
0
N/A