Waveform:status - Agilent Technologies U2300A Series Programming Manual

15 WAVeform Subsystem

WAVeform:STATus?

Syntax

WAVeform:STATus?

This commands queries the acquisition status of the instrument.
Supported Model
U2351A, U2352A, U2353A, U2354A, U2355A, U2356A, U2331A
Parameters
Item
<mode>
Remarks
• For
• Buffer block.
Query Returned Format
<mode> ::= {EPTY|FRAG|DATA|OVER}
152
Type Range of Values
String EPTY: Empty, no data captured
FRAG: Fragment, DAQ start to measure but
memory buffer block is not complete yet
DATA: At least one block is complete and
ready to be read back
OVER: Buffer is full and the acquisition stops
RUN
command (continuous analog input mode) only.
U2300A Series USB DAQ Programming Guide
Default Value
EPTY