Route:channel:stype - Agilent Technologies U2300A Series Programming Manual

10 ROUTe Subsystem

ROUTe:CHANnel:STYPe

Syntax
ROUTe:CHANnel:STYPe <mode>, (@<ch_list>)
This command is used to set the reference ground selection of the
specified analog input channel.
ROUTe:CHANnel:STYPe? (@<ch_list>)
The query command returns a string value representing the signal type of
both specified analog inputs and outputs. Multiple responses are separated
by commas.
Supported Model
U2351A, U2352A, U2353A, U2354A, U2355A, U2356A, U2331A
Parameters
Item Type
<mode> String
<ch_list> Numeric
92
Range of Values
DIFF: Differential mode
SING: Referenced single-ended mode (16/64 ch common to
ground system on board)
NRS: Non-referenced single-ended mode (16/64 ch common to
AISENSE pin)
Single-ended mode:
U2351A/U2352A/U2353A/U2354A: 101-116
U2355A/U2356A/U2331A: 101-164
Differential mode:
U2351A/U2352A/U2353A/U2354A: 101-108
U2355A/U2356A/U2331A: 101-132
U2300A Series USB DAQ Programming Guide
Default Value
SING
N/A