Data[:User] - Agilent Technologies U2300A Series Programming Manual

DATA[:USER]

Syntax
DATA[:USER]
DATA <header><binary block>
This command is used to set the user- defined pattern onto the FIFO
buffer.
Supported Model
U2352A, U2354A, U2355A, U2356A, U2331A
Remarks
• Binary block must use the IEEE- 488.2 binary block format.
• Syntax cannot be executed while analog output is running after
• This is an adjunct command for APPLy:USER.
Example
DATA #800000200<byte1><byte2>...<byte200>
See Also:
OUTPut:WAVeform:ITERate
OUTPut:WAVeform:SRATe
U2300A Series USB DAQ Programming Guide
executing command OUTPut ON.
Root Commands 9
83