Configure:ssi - Agilent Technologies U2300A Series Programming Manual

5 CONFigure Subsystem

CONFigure:SSI

Syntax
CONFigure:SSI <mode>
This command sets the synchronization status (master/slave) when used in
the U2781A modular instrument chassis.

CONFigure:SSI?

The query command returns a string value, which represents the
synchronization status (master/slave).
Supported Model
U2351A, U2352A, U2353A, U2354A, U2355A, U2356A, U2331A
Parameters
N O T E
Remarks
• This command will force all reference clock sources to synchronous
• Once a module is configured as a slave (via CONFigure:SSI:SLAV), it
30
Item Type
<mode> String
• This command is only operational when used in U2781A modular
instrument chassis.
• There should only be one master assigned.
serial interface (SSI).
becomes a listener and listens for triggering signals on the backplane of
the U2781A chassis. To undo this listener behavior, a
CONFigure:SSI:NONE command must be applied to the slave module.
Range of Values
NONE: None
MAST: To function as SSI master triggering
source
SLAV: To receive triggering source from
master
U2300A Series USB DAQ Programming Guide
Default Value
NONE