Out-of-Chassis Repairs
Page 91-2
Base Engine Components
DODGE Turbo Diesel
Oil Pan, Suction Tube and/or Gasket -
Replacement
:»} 17mm, 10mm
Note: This operation will require engine removal.
Drain the oil and remove the pan and gasket.
j
10mm, 13mm
Caution: Be sure to connect the support bracket.
If required, remove the suction tube and gasket.
NJ
Clean the sealing surface.
Torque Value: 24 N-m [18 ft-lbs]
Lire
to fill the joint between the pan rail,
and rear cover with sealant. Use Three
to gear housing
to rear cover