Table of Contents
Advertisement
Base Engine Components
DODGE Turbo Diesel
In-Chassis Repairs
Page 9F-19
Check valve depth (C) (Integral and insert valve seats).
Valve Depth
mm
in
0.99
1.52
MIN
MAX
0.039
0.060
Caution: Replace the valve if the depth is over the limit.
Apply a light coat of valve lapping compound to each valve and
lap each valve to its companion seat.
Remove the valves and clean the lapping compound from the
valves and seats.
M 2 l
Measure the valve seat width indicated by the lapped surface.
Valve Seat Width Limit:
Minimum (1): 1.5mm [0.060 inch]
Maximum (2): 2.0mm [0.080 inch]
Advertisement
Table of Contents
Troubleshooting
