Table of Contents
Advertisement
Base Engine Components
DODGETurbo Diesel
In-Chassis Repairs
Page 9F-43
Tappet Installation
Insert the trough the full length of the cam bore.
Feed the installation tool down the tappet bore and into the
trough.
Feed the installation tool through the cam bores by carefully
pulling the trough/installation tool out the front. The barrier at
the rear of the trough will assure the tool will be pulled out with
it.
Lubricate the tappets at locations A and B with Lubriplate 105.
Advertisement
Table of Contents
Troubleshooting
