Dodge D250 1990 Service Manual page 413

Turbocharger - Rebuilding
Page 11-32
Exhaust System and Intake Manifold
DODGE Turbo Diesel
Install the thrust collar.
Caution: Align the balance mark with the balance mark
on the shaft. Mark the top surface with a marker pen so
alignment can be verified after installing the thrust
bearing.
til
As
T20 Torx
Lubricate the thrust bearing with engine oil and install it on the
housing.
^ ' T o r q u e Value: 4.5 N-m [40 in-lbs]
{ 1 | P l n s t a H ^ e oil baffle.
Caution: Check the balance mark alignment.
^Im install the piston ring type seal on the oil slinger.