Base Engine Components
DODGE Turbo Diesei
In-Chassis Repairs
Page 9F-47
Operate the engine at idle for 5 to 10 minutes and check p§>
for leaks and loose parts.
Flywheel Ring Gear - Replacement
Preparatory Step:
• Remove the transmission.
• Remove the clutch cover.
- Remove the clutch plate.
19mm
Remove the flywheel.
Brass Drift Pin
Warning; Wear eye protection when you drive the gear from |Ut I
the flywheel. Do not use a steel drift pin.
Use a drift pin to drive the ring gear from the flywheel. Strike
the gear at several points around the wheel until it Is off.