Connecting Rod Bearings - Install; Piston And Rod Assembly Installation - Dodge D250 1990 Service Manual

Out-of-Chassis Repairs
Page §1-16
(
^
Base Engine Components
DODGE Turbo Diesel
Remove the protective tape from the block surface.
Standard
Oversize
.250 mm [.0098 In.]
.500 mm [.0197 In.]
.750 mm [.0295 in.]
1.000 mm [.0394 in.]
Q^) Connecting Rod Bearing - install
<JS&* Determine the size of the bearing removed and obtain the
same size bearing for installation.
Refer to the dimensions of the standard and undersize
connecting rod bearing journals.
Caution: Do not lubricate the side of the bearing that Is
against the connecting rod or cap.
Apply a coat of Lubriplate 105 to the new upper and lower
connecting rod bearings.