Base Engine Components
DODGE Turbo Diesel
In-Chassis Repairs
Page9F-37
Measure the bearing journals and valve lobes.
Limits
* Journal
- Minimum Diameter: 53.962mm [2.1245 inch]
- Valve Lobes: (Minimum Diameter at Peak of Lobe)
• Intake Minimum Height: 47.040mm [1.852 inch]
• Exhaust Minimum Height: 46.770mm [1.841 inch]
- Lift Pump Lobe Diameter Minimum: 35.5mm [1.3%
Camshaft Gear - Replacement
Press the camshaft out of the gear.
Remove all burrs and smooth any rough surfaces caused by
removing the gear.