Exhaust System and Intake Manifold
DODGE Turbo Diesel
Turbocharger - Rebuilding
Page 11-31
Install the inner retainer rings.
Caution: The beveled face must be towards the bearing.
Lubricate the turbocharger bearings with engine oil and install
the bearings in the housing.
Install the outer retainer ring.
Caution: The beveled face must be towards the bearings.
Assemble the turbine shaft and heat shield to the bearing
( j l p i
housing.
Caution: Rotating t h e housing a s you press downward •
•
will assist in properly seating the piston ring.