Table of Contents
Advertisement
Air System
Page 11-14
Exhaust System and intake Manifold
DODGETurbo Diesel
install the gasket and cover.
Install the fuel heater ground wire.
Torque V a l u e : 12 N-m [110 in-lbs]
3 c a p s c r e w h o l e s are drilled through
I. Apply liquid teflon s e a l a n t to the
m [18 ft-lbs] *
5/16 Inch, 10mm, 3/8 inch
Install the intake manifold heater power supply connections.
Assemble the intake piping and intake manifold heater.
Install the throttle control bracket a n d c o n n e c t the intake
manifold heater ground wire. Install the throttle rod to the
throttle lever.
Torque Value:
• Intake manifold heater power supply - 1 4 N-m [10 ft-lbs]
• Intake crossover tube capscrews - 24 N-m [18 ft-lbs]
• Hose clamps - 5 N-m [44 in-lbs]
Advertisement
Table of Contents
Troubleshooting
