Dodge D250 1990 Service Manual page 441

Fuel System Replacement Procedures
Page 14-22
Fuel System
DODGETurbo Diesel
10mm
Remove the banjo fitting screws and washers.
13mm
Disconnect the drain line fittings.
Assemble the drain line and fuel drain manifold in the reverse
order of disassembly.
Note: Use new seals on all fittings.
10mm
t ^ j
Tighten the banjo fitting screw.
Torque Value: 8 N-m [6 ft-lbs]
Note: Use new sealing washers for the fuel drain manifold.