Timing Pin Housing Assembly - Installation (With Head On) - Dodge D250 1990 Service Manual

Base Engine Components
DODGE Turbo Diesel
In-Chassis Repairs
Page9F-27
T-25 Tone
Remove the timing pin assembly and gasket.
Install a new gasket and, if required, a new timing pin 0&
assembly. p¥
(<\.
Apply a coat of Loctite 59241 liquid Teflon to the threads of the
Torx head screws.
Hold the pin (A) in the hole (B) in the camshaft gear to align the
housing.
Torque Value; 5 N-m [44 in-lbs]
Timing Pin Housing Assembly - Installation (With
Head On)
The location of the timing pin assembly on the gear housing Is
critical for correct engine adjustments. Follow this procedure to
install the assembly so that it corresponds to Top Dead Center
(TDC) for Cylinder Number 1.
Looking through the hole in the gear housing, rotate the engine
until the hole in the camgear can be seen.