Dodge D250 1990 Service Manual page 453

Fuel System Replacement Procedures
Page 14-34
Fuel System
DODGE Turbo Diesel
12mm, 1/2 inch, 17mm
Install the fuel pump vent line and capscrew.
Torque Value 32 N-m [24 ft-lbs]
Install the air fuel control tube.
Tighten the banjo fitting.
Torque Value 12 N-m [9 ft-lbs]
10mm
j p l | Install the throttle bracket and linkage. When connecting the
cable to the control lever, adjust the length so the lever has
stop-to-stop movement.
1. Torque Value: 24 N-m [18 ft-lbs]
2. Torque Value: 10 N-m [7.5 ft-lbs]
3. Stop to Stop Adjustment
Bleed all air from the fuel system.
Screw Driver, 10mm Wrench
If necessary, adjust the idle speed.