Engine Sealants - Dodge D250 1990 Service Manual

Base Engine Components
DODGE Turbo Diesel
Specifications
Page9L-7
Engine Sealants
Use the sealants listed below or sealants containing equivalent properties.
Description
Pipe Plugs
Gaskets
a. Oil Pan
b. Tappet Cover (6 cylinder)
c. Ail Other Gaskets
Cup Plugs
O-Rings
Rear Camshaft Expansion Plug
Intake Cover Capscrews
Fuel Pump Studs
Turbo Drain in Block
Dipstick Tube in Block
Front Seal in Gear Cover
Rear Seal in Rear Cover
Timing Pin Housing Capscrews
Sealing Method
Precoated teflon, or Loctite 59,241 liquid teflon,
Apply Three Bond 1207-C (or Permatex #2C)
to the four T joints and smear into the joints with
finger until full.
Self-adhesive tappet cover side. K&W Copper Coat
#1504-block side.
No sealant required.
Loctite 277,11,264, or #2654427 MS CD 96 Type A.
No sealant required.
Loctite 277,11,264, or #2654427 MS CD 96 Type A.
Precoated or Loctite 59,241 liquid teflon.
Loctite 601.
Loctite 277,11,264 or #2654427 MS CD 96 Type A.
Loctite 277,11,264 or #2654427 MS CD 96 Type A.
Loctite 277,11,264 or #2654427 MS CD 96 Type A.
No sealant on seal with rubber O.D.
Loctite 277,11,264 or #2654427 MS CD 96 Type A,
on seal with Aluminum Housing.
Loctite 59,241 liquid teflon or precoated.