Alternative Repair Procedures
Page9K-22
Base Engine Components
DODGETurbo Diesei
O
o
Install the valves in their designated locations and measure the
depth of each.
D
jxsxr/j,
V a , v e
Depth Limit (Integral and Inserted Seats)
C « 0.99mm to 1.52mm [.039 to .060 inch]
Note: Replace the valve if the depth is over the limit.
Apply a light coat of valve lapping compound to each valve and
lap each valve to its mating seat.
Remove the valves and clean lapping compound from the
valves and seats.