Table of Contents
Advertisement
In-Chassis Repairs
Page9F-46
Base Engine Components
DODGE Turbo Diesel
Caution: When installing the camshaft, do not push it in farther
than it will go with the thrust washer in place. Pushing it too
far can dislodge the plug in the rear of the cam bore and cause
an oil leak.
Install the camshaft/thrust washer. Align the timing marks as
iliustrated.
13mm
H » Install the thrust washer capscrews and tighten to 24 N-m
n o ft i l i d
[18ft-Ibs]
2 h Verify the camshaft has the correct amount of back lash and
*S
end clearance.
A = 0.152 to 0.254mm [0.006 to 0.010 inch]
B = 0.08 to 0.33mm [0.003 to 0.013 inch]
Install the following parts.
^ c * * R e f e r to appropriate sections of this manual for torque
sequence and values and for clearance specifications.
• Gear cover
- Vibration damper
• Rocker levers and valve cover
• Lift pump
Advertisement
Table of Contents
Troubleshooting
