Electrical System
DODGE Turbo Diesel
Engine Electrical System Replacement Procedures
Page 8-13
7mm, 8mm, 10mm
Remove and tag all wires and complete the following steps.
13mm
Remove the alternator link capscrew.
13mm, 15mm
Remove the alternator mounting capscrew.
7mm, 8mm, 10mm, 13mm, 15mm
install the alternator. Tighten the upper mounting capscrews ^
before tightening the lower mounting bolt. Re-connect all wires.
^
Torque Value:
Upper Capscrew -24 N-m [18 ft-lbs]
Lower Bolt - 43 N-m [32 ft-lbs]