Oil Life Reset - Dodge RAM 1500 2020 Owner's Manual

94 GETTING TO KNOW YOUR INSTRUMENT PANEL
The instrument cluster display menu items may consist of
the following:
 Speedometer
 Vehicle Info
 Driver Assist — If Equipped
 Fuel Economy
 Trip Info
 Stop/Start — If Equipped
 Trailer Tow — If Equipped
 Audio
 Messages
 Screen Setup
 Vehicle Settings — If Equipped
The system allows the driver to select information by
pushing the following instrument cluster display control
buttons located on the left side of the steering wheel.
Instrument Cluster Display Control Buttons
Up And Down Arrow Buttons:
Using the up or down arrow button allow you to cycle
through the Main Menu Items.
Left And Right Arrow Buttons:
Using the left or right arrow button allow you to cycle
through the submenu items of the Main menu item.
NOTE:
 Holding the up/down or left/right arrow button will loop
the user through the currently selected menu or
options presented on the screen.
 Main menu and submenus wrap for continuous
scrolling.
 Upon returning to a main menu, the last submenu
screen viewed within that main menu will be displayed.
OK Button:
For Digital Speedometer:
 Pushing the OK button changes units (mph or km/h).
For Screen Setup:
 OK button allows user to enter menu and submenus.
 Within each submenu layer, the up and down arrows
will allow the user to select the item of interest.
 Pushing the OK button makes the selection and a
confirmation screen will appear (returning the user to
the first page of the submenu).
 Pushing the left arrow button will exit each submenu
layer and return to the main menu.
O L R
IL IFE ESET
Your vehicle is equipped with an engine oil change
indicator system. The "Oil Change Required" message will
display in the instrument cluster display for five seconds
after a single chime has sounded, to indicate the next
scheduled oil change interval. The engine oil change
indicator system is duty cycle based, which means the
engine oil change interval may fluctuate, dependent upon
your personal driving style.
Unless reset, this message will continue to display each
time you place the ignition in the ON/RUN position. To turn
off the message temporarily, push and release the OK or
arrow buttons. To reset the oil change indicator system
(after performing the scheduled maintenance), refer to
the following procedure:
1. Without pressing the brake pedal, push the ENGINE
START/STOP button and place the ignition in the
ON/RUN position (do not start the engine).
2. Push and release the down arrow button to scroll
downward through the main menu to "Vehicle Info."
3. Push and release the right arrow button to access the
"Oil Life" screen.
4. Push and hold the OK button to reset oil life. If
conditions are met, the gauge and numeric display
will update to show 100%. If conditions are not met a
pop-up message of "To reset oil life engine must be
off with ignition in run" will be displayed (for five
seconds), and the user will remain at the Oil Life
screen.