Dodge D250 1990 Service Manual page 333

Alternative Repair Procedures
Page9K-2
Base Engine Components
DODGE Turbo Diesel
About this Section
This section describes and illustrates approved repair procedures for the cylinder block, crankshaft, and cylinder
head. Procedures shown are performed in an engine machine shop environment. Shop tools and tool sizes are
identified through the section when applicable and all necessary dimensions, angles, and surface finishes are
specified.
When Should an Alternative Repair Be Performed?
The following procedures do provide an alternative to replacement of major engine components. Local machine
shop expertise is the first criterion. Beyond the technical requirements, availability, price and equipment down time
are the considerations that will influence the decision.
Inspection
The procedures assume the component was inspected and the discrepancy noted during repair or overhaul. Only
those inspection requirements directly related to the alternative repair procedure are provided in this manual.
Follow All Safely Instructions Noted in the Procedures
Follow the manufacturer's recommendations for cleaning solvents and other substances used during the repair of
the engine. Also, be sure to use good safety practices with tools and equipment.
Follow the Cleaning Instructions Specified in the Procedures
After completing the repair, make sure all machining debris Is removed and that the part is thoroughly cleaned.
Perform the Inspections Specified in the Procedures
After the repair, perform the required inspection to make sure the part meets the technical requirements for
continued use in an engine.