Metric System - Dodge D250 1990 Service Manual

Introduction CHRYSLER MOTORS
Page 16 DODGE Turbo Diesel
Metric System
Artwork, specifications, and tightening references in this Service Manual are identified in the metric system and in
the [standard-inch] system.
During any maintenance or repair procedures, it is important to salvage metric fasteners (nuts, bolts, etc.) for
reassembly. If the fastener Is not salvageable, a fastener of equivalent specification should be used.
Caution: Use of an incorrect fastener may result in component damage or personal injury.
The metric system is based on quantities of one, ten, one hundred, one thousand, and one million.
Metric Prefixes
Mega- (M) means million
Kilo- (K) means thousand
Deci- (D) means tenth
Centl- (C) means hundredth
Mill! - (M) means thousandth