Table of Contents
Advertisement
Correct Folding — Hold Panels Together
NOTE:
Fold the panel gently. It is not recommended to allow the
panels to drop under their own weight.
7.
Make sure to clip both stowage straps to prevent the
Tonneau Cover panels from unfolding.
Fully Folded Tonneau Cover
1 — Stowage Strap
2 — Tonneau Cover Bumper And Seat
8.
With two people, remove the cover.
NOTE:
Be sure the Tonneau Cover has been folded
completely, and the stowage straps are engaged,
before removing.
You can drive the vehicle with a fully folded Tonneau
Cover. To do so, make sure both front latches and both
stowage straps are engaged. Damage to the Tonneau
Cover or vehicle might occur if the latches or stowage
straps are not engaged.
T
-F
T
C
RI
OLD
ONNEAU
OVER
I
NSTALLATION
To install the Tonneau Cover follow these steps:
1.
Position the folded Tonneau Cover on the truck bed
and push the cover forward against the front of the
truck bed. The Tonneau Cover centers itself when
placed on the vehicle.
2.
Slide the locking lever toward the outside of the truck
bed and release the clamp, and pull the handle
downward into the Released Position. Do this for both
the left and right side.
GETTING TO KNOW YOUR VEHICLE
Slide Locking Lever Inward
Released Position
83
2
Advertisement
Table of Contents
