Fluorescence Polarization (Fp) Detection Cartridges - Molecular Devices SpectraMax Paradigm User Manual

Table 5-19: Measurement Specification for Fluorescence Intensity Dual Label (FI-DL)
(MultiTox-Fluor) Detection Cartridge (continued)
Item
Application

Fluorescence Polarization (FP) Detection Cartridges

The Fluorescence Polarization (FP) Detection Cartridges enable fluorescence polarization
read modes for specific labels, depending on the cartridge.
Fluorescence Polarization (FP) Detection Cartridges are available for the following labels:
Fluorescence Polarization (FP) (Fluorescein) Detection Cartridge
Fluorescence Polarization (FP) (Rhodamine) Detection Cartridge
Each Fluorescence Polarization (FP) Detection Cartridge occupies one (1) slot in the detection
cartridge drawer. It can be installed in either the top detection cartridge drawer for top
reading, or in the bottom detection cartridge drawer for bottom reading.
For installation instructions, see
Note:Molecular Devices recommends that you install the Fluorescence Polarization
(FP) Detection Cartridge in the top detection cartridge drawer.
The can do the following read types:
End Point, see
Kinetic, see
You can create protocols that use the Fluorescence Polarization (FP) Detection Cartridges in
the SoftMax Pro Software. For information on creating protocols, see "Creating a Protocol"
in the SoftMax Pro Software application help or user guide.
You can use the Protocol Manager in the SoftMax Pro Software to quickly find and open a
predefined protocol.
More protocols and updated protocols can be downloaded from the Knowledge Base on the
Molecular Devices support web site (www.moleculardevices.com/support) or from the
protocol sharing web site (www.softmaxpro.org).
5014038 E
Description
Designed for use with Promega MultiTox-Fluor reagents
Installing a Detection Cartridge on page
Endpoint Read Type on page
Kinetic Read Type on page
Chapter 5: Available Detection Cartridges
20.
20.
84.
125