Moving The Instrument - Molecular Devices SpectraMax Paradigm User Manual

SpectraMax Paradigm Multi-Mode Detection Platform User Guide

Moving the Instrument

Before moving the SpectraMax Paradigm Multi-Mode Detection Platform, make sure that
the new location is a dry, flat work area that has sufficient space for the instrument, host
computer, and required cables. See
To move the instrument:
1. Disconnect the gas supply line, if applicable. See
Supply on page
2. Install the transport locks on the microplate drawer and the detection cartridge drawer.
See
3. If you are transporting the instrument to a different building, pack the instrument in the
original packaging. See
152
WARNING! LIFTING HAZARD.
people to lift the instrument.
CAUTION! When transporting the instrument, warranty claims are void if damage
during transport is caused by improper packing.
76.
Installing the Transport Locks on page
Packing the Instrument on page
CAUTION! Keep the box upright. Do not tip or tilt the box or place it on its side.
To prevent injury, use a minimum of two
Instrument Specifications on page
Connecting and Disconnecting a Gas
153.
167.
159.
5014038 E