Multi-Mode (Multi) Detection Cartridge - Molecular Devices SpectraMax Paradigm User Manual

SpectraMax Paradigm Multi-Mode Detection Platform User Guide

Multi-Mode (MULTI) Detection Cartridge

Optimized for 96-well and 384-well plates, the Multi-Mode (MULTI) Detection Cartridge
enables several detection modes, including:
Fluorescence Intensity (FL), see
Time-Resolved Fluorescence (TRF), see
Luminescence (LUM), see
The Multi-Mode (MULTI) Detection Cartridge occupies three (3) slots in the detection
cartridge drawer. It can be installed in either the top detection cartridge drawer for top
reading, or in the bottom detection cartridge drawer for bottom reading.
For installation instructions, see
The can do the following read types:
End Point, see
Kinetic, see
Well Scan, see
You can create protocols that use the Multi-Mode (MULTI) Detection Cartridge in the
SoftMax Pro Software. For information on creating protocols, see "Creating a Protocol" in
the SoftMax Pro Software application help or user guide.
You can use the Protocol Manager in the SoftMax Pro Software to quickly find and open a
predefined protocol.
More protocols and updated protocols can be downloaded from the Knowledge Base on the
Molecular Devices support web site (www.moleculardevices.com/support) or from the
protocol sharing web site (www.softmaxpro.org).
102
Note:Molecular Devices recommends that you install the Multi-Mode (MULTI)
Detection Cartridge in the top detection cartridge drawer when running time-resolved
fluorescence or glow luminescence read modes.
Endpoint Read Type on page
Kinetic Read Type on page
Well Scan Read Type on page
About Fluorescence Intensity on page
About Time-Resolved Fluorescence on page
About Luminescence on page
Installing a Detection Cartridge on page
20.
20.
21.
103.
104.
84.
104.
5014038 E