Chapter 3 - Commissioning
CPE – ODU LEDs
To verify the correct operation of the CPE – ODU, examine the LED
indicators located on the bottom panel of the outdoor unit.
The following tables list the provided LEDs and their associated
indications.
NOTE
Verifying the correct operation of the Outdoor Unit using the LEDs, as described below,
is only possible after the configuration and alignment processes are completed.
Name
Description
PWR
Power indication
ALARM
Alarm indication
ETH
Ethernet link status
indication
LINK QUALITY
Wireless link status
bar display
and signal quality
Indication
3-14
Table 3-11: CPE-ODU LEDs
Functionality
Off – ODU is not powered or 3.3V failed
Green – ODU power OK
Off – ODU OK
Red – ODU failure
Off – No Ethernet connectivity has been
detected between the outdoor unit and the
device connected to the indoor unit.
Green– Self-test passed and Ethernet
connection confirmed by the outdoor unit
(Ethernet integrity check passed).
See Table 3-12
BreezeMAX System Manual